1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2#ifndef _ASM_GENERIC_SIGINFO_H
3#define _ASM_GENERIC_SIGINFO_H
4
5
6#include <linux/types.h>
7
8typedef union sigval {
9 int sival_int;
10 void *sival_ptr;
11} sigval_t;
12
13#define SI_MAX_SIZE 128
14
15/*
16 * The default "si_band" type is "long", as specified by POSIX.
17 * However, some architectures want to override this to "int"
18 * for historical compatibility reasons, so we allow that.
19 */
20#ifndef __ARCH_SI_BAND_T
21#define __ARCH_SI_BAND_T long
22#endif
23
24#ifndef __ARCH_SI_CLOCK_T
25#define __ARCH_SI_CLOCK_T __kernel_clock_t
26#endif
27
28#ifndef __ARCH_SI_ATTRIBUTES
29#define __ARCH_SI_ATTRIBUTES
30#endif
31
32/*
33 * Be careful when extending this union. On 32bit siginfo_t is 32bit
34 * aligned. Which means that a 64bit field or any other field that
35 * would increase the alignment of siginfo_t will break the ABI.
36 */
37union __sifields {
38 /* kill() */
39 struct {
40 __kernel_pid_t _pid; /* sender's pid */
41 __kernel_uid32_t _uid; /* sender's uid */
42 } _kill;
43
44 /* POSIX.1b timers */
45 struct {
46 __kernel_timer_t _tid; /* timer id */
47 int _overrun; /* overrun count */
48 sigval_t _sigval; /* same as below */
49 int _sys_private; /* not to be passed to user */
50 } _timer;
51
52 /* POSIX.1b signals */
53 struct {
54 __kernel_pid_t _pid; /* sender's pid */
55 __kernel_uid32_t _uid; /* sender's uid */
56 sigval_t _sigval;
57 } _rt;
58
59 /* SIGCHLD */
60 struct {
61 __kernel_pid_t _pid; /* which child */
62 __kernel_uid32_t _uid; /* sender's uid */
63 int _status; /* exit code */
64 __ARCH_SI_CLOCK_T _utime;
65 __ARCH_SI_CLOCK_T _stime;
66 } _sigchld;
67
68 /* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGTRAP, SIGEMT */
69 struct {
70 void *_addr; /* faulting insn/memory ref. */
71#ifdef __ia64__
72 int _imm; /* immediate value for "break" */
73 unsigned int _flags; /* see ia64 si_flags */
74 unsigned long _isr; /* isr */
75#endif
76
77#define __ADDR_BND_PKEY_PAD (__alignof__(void *) < sizeof(short) ? \
78 sizeof(short) : __alignof__(void *))
79 union {
80 /* used on alpha and sparc */
81 int _trapno; /* TRAP # which caused the signal */
82 /*
83 * used when si_code=BUS_MCEERR_AR or
84 * used when si_code=BUS_MCEERR_AO
85 */
86 short _addr_lsb; /* LSB of the reported address */
87 /* used when si_code=SEGV_BNDERR */
88 struct {
89 char _dummy_bnd[__ADDR_BND_PKEY_PAD];
90 void *_lower;
91 void *_upper;
92 } _addr_bnd;
93 /* used when si_code=SEGV_PKUERR */
94 struct {
95 char _dummy_pkey[__ADDR_BND_PKEY_PAD];
96 __u32 _pkey;
97 } _addr_pkey;
98 /* used when si_code=TRAP_PERF */
99 struct {
100 unsigned long _data;
101 __u32 _type;
102 } _perf;
103 };
104 } _sigfault;
105
106 /* SIGPOLL */
107 struct {
108 __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */
109 int _fd;
110 } _sigpoll;
111
112 /* SIGSYS */
113 struct {
114 void *_call_addr; /* calling user insn */
115 int _syscall; /* triggering system call number */
116 unsigned int _arch; /* AUDIT_ARCH_* of syscall */
117 } _sigsys;
118};
119
120#ifndef __ARCH_HAS_SWAPPED_SIGINFO
121#define __SIGINFO \
122struct { \
123 int si_signo; \
124 int si_errno; \
125 int si_code; \
126 union __sifields _sifields; \
127}
128#else
129#define __SIGINFO \
130struct { \
131 int si_signo; \
132 int si_code; \
133 int si_errno; \
134 union __sifields _sifields; \
135}
136#endif /* __ARCH_HAS_SWAPPED_SIGINFO */
137
138typedef struct siginfo {
139 union {
140 __SIGINFO;
141 int _si_pad[SI_MAX_SIZE/sizeof(int)];
142 };
143} __ARCH_SI_ATTRIBUTES siginfo_t;
144
145/*
146 * How these fields are to be accessed.
147 */
148#define si_pid _sifields._kill._pid
149#define si_uid _sifields._kill._uid
150#define si_tid _sifields._timer._tid
151#define si_overrun _sifields._timer._overrun
152#define si_sys_private _sifields._timer._sys_private
153#define si_status _sifields._sigchld._status
154#define si_utime _sifields._sigchld._utime
155#define si_stime _sifields._sigchld._stime
156#define si_value _sifields._rt._sigval
157#define si_int _sifields._rt._sigval.sival_int
158#define si_ptr _sifields._rt._sigval.sival_ptr
159#define si_addr _sifields._sigfault._addr
160#define si_trapno _sifields._sigfault._trapno
161#define si_addr_lsb _sifields._sigfault._addr_lsb
162#define si_lower _sifields._sigfault._addr_bnd._lower
163#define si_upper _sifields._sigfault._addr_bnd._upper
164#define si_pkey _sifields._sigfault._addr_pkey._pkey
165#define si_perf_data _sifields._sigfault._perf._data
166#define si_perf_type _sifields._sigfault._perf._type
167#define si_band _sifields._sigpoll._band
168#define si_fd _sifields._sigpoll._fd
169#define si_call_addr _sifields._sigsys._call_addr
170#define si_syscall _sifields._sigsys._syscall
171#define si_arch _sifields._sigsys._arch
172
173/*
174 * si_code values
175 * Digital reserves positive values for kernel-generated signals.
176 */
177#define SI_USER 0 /* sent by kill, sigsend, raise */
178#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
179#define SI_QUEUE -1 /* sent by sigqueue */
180#define SI_TIMER -2 /* sent by timer expiration */
181#define SI_MESGQ -3 /* sent by real time mesq state change */
182#define SI_ASYNCIO -4 /* sent by AIO completion */
183#define SI_SIGIO -5 /* sent by queued SIGIO */
184#define SI_TKILL -6 /* sent by tkill system call */
185#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
186#define SI_ASYNCNL -60 /* sent by glibc async name lookup completion */
187
188#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
189#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
190
191/*
192 * SIGILL si_codes
193 */
194#define ILL_ILLOPC 1 /* illegal opcode */
195#define ILL_ILLOPN 2 /* illegal operand */
196#define ILL_ILLADR 3 /* illegal addressing mode */
197#define ILL_ILLTRP 4 /* illegal trap */
198#define ILL_PRVOPC 5 /* privileged opcode */
199#define ILL_PRVREG 6 /* privileged register */
200#define ILL_COPROC 7 /* coprocessor error */
201#define ILL_BADSTK 8 /* internal stack error */
202#define ILL_BADIADDR 9 /* unimplemented instruction address */
203#define __ILL_BREAK 10 /* illegal break */
204#define __ILL_BNDMOD 11 /* bundle-update (modification) in progress */
205#define NSIGILL 11
206
207/*
208 * SIGFPE si_codes
209 */
210#define FPE_INTDIV 1 /* integer divide by zero */
211#define FPE_INTOVF 2 /* integer overflow */
212#define FPE_FLTDIV 3 /* floating point divide by zero */
213#define FPE_FLTOVF 4 /* floating point overflow */
214#define FPE_FLTUND 5 /* floating point underflow */
215#define FPE_FLTRES 6 /* floating point inexact result */
216#define FPE_FLTINV 7 /* floating point invalid operation */
217#define FPE_FLTSUB 8 /* subscript out of range */
218#define __FPE_DECOVF 9 /* decimal overflow */
219#define __FPE_DECDIV 10 /* decimal division by zero */
220#define __FPE_DECERR 11 /* packed decimal error */
221#define __FPE_INVASC 12 /* invalid ASCII digit */
222#define __FPE_INVDEC 13 /* invalid decimal digit */
223#define FPE_FLTUNK 14 /* undiagnosed floating-point exception */
224#define FPE_CONDTRAP 15 /* trap on condition */
225#define NSIGFPE 15
226
227/*
228 * SIGSEGV si_codes
229 */
230#define SEGV_MAPERR 1 /* address not mapped to object */
231#define SEGV_ACCERR 2 /* invalid permissions for mapped object */
232#define SEGV_BNDERR 3 /* failed address bound checks */
233#ifdef __ia64__
234# define __SEGV_PSTKOVF 4 /* paragraph stack overflow */
235#else
236# define SEGV_PKUERR 4 /* failed protection key checks */
237#endif
238#define SEGV_ACCADI 5 /* ADI not enabled for mapped object */
239#define SEGV_ADIDERR 6 /* Disrupting MCD error */
240#define SEGV_ADIPERR 7 /* Precise MCD exception */
241#define SEGV_MTEAERR 8 /* Asynchronous ARM MTE error */
242#define SEGV_MTESERR 9 /* Synchronous ARM MTE exception */
243#define NSIGSEGV 9
244
245/*
246 * SIGBUS si_codes
247 */
248#define BUS_ADRALN 1 /* invalid address alignment */
249#define BUS_ADRERR 2 /* non-existent physical address */
250#define BUS_OBJERR 3 /* object specific hardware error */
251/* hardware memory error consumed on a machine check: action required */
252#define BUS_MCEERR_AR 4
253/* hardware memory error detected in process but not consumed: action optional*/
254#define BUS_MCEERR_AO 5
255#define NSIGBUS 5
256
257/*
258 * SIGTRAP si_codes
259 */
260#define TRAP_BRKPT 1 /* process breakpoint */
261#define TRAP_TRACE 2 /* process trace trap */
262#define TRAP_BRANCH 3 /* process taken branch trap */
263#define TRAP_HWBKPT 4 /* hardware breakpoint/watchpoint */
264#define TRAP_UNK 5 /* undiagnosed trap */
265#define TRAP_PERF 6 /* perf event with sigtrap=1 */
266#define NSIGTRAP 6
267
268/*
269 * There is an additional set of SIGTRAP si_codes used by ptrace
270 * that are of the form: ((PTRACE_EVENT_XXX << 8) | SIGTRAP)
271 */
272
273/*
274 * SIGCHLD si_codes
275 */
276#define CLD_EXITED 1 /* child has exited */
277#define CLD_KILLED 2 /* child was killed */
278#define CLD_DUMPED 3 /* child terminated abnormally */
279#define CLD_TRAPPED 4 /* traced child has trapped */
280#define CLD_STOPPED 5 /* child has stopped */
281#define CLD_CONTINUED 6 /* stopped child has continued */
282#define NSIGCHLD 6
283
284/*
285 * SIGPOLL (or any other signal without signal specific si_codes) si_codes
286 */
287#define POLL_IN 1 /* data input available */
288#define POLL_OUT 2 /* output buffers available */
289#define POLL_MSG 3 /* input message available */
290#define POLL_ERR 4 /* i/o error */
291#define POLL_PRI 5 /* high priority input available */
292#define POLL_HUP 6 /* device disconnected */
293#define NSIGPOLL 6
294
295/*
296 * SIGSYS si_codes
297 */
298#define SYS_SECCOMP 1 /* seccomp triggered */
299#define SYS_USER_DISPATCH 2 /* syscall user dispatch triggered */
300#define NSIGSYS 2
301
302/*
303 * SIGEMT si_codes
304 */
305#define EMT_TAGOVF 1 /* tag overflow */
306#define NSIGEMT 1
307
308/*
309 * sigevent definitions
310 *
311 * It seems likely that SIGEV_THREAD will have to be handled from
312 * userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
313 * thread manager then catches and does the appropriate nonsense.
314 * However, everything is written out here so as to not get lost.
315 */
316#define SIGEV_SIGNAL 0 /* notify via signal */
317#define SIGEV_NONE 1 /* other notification: meaningless */
318#define SIGEV_THREAD 2 /* deliver via thread creation */
319#define SIGEV_THREAD_ID 4 /* deliver to thread */
320
321/*
322 * This works because the alignment is ok on all current architectures
323 * but we leave open this being overridden in the future
324 */
325#ifndef __ARCH_SIGEV_PREAMBLE_SIZE
326#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(int) * 2 + sizeof(sigval_t))
327#endif
328
329#define SIGEV_MAX_SIZE 64
330#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE - __ARCH_SIGEV_PREAMBLE_SIZE) \
331 / sizeof(int))
332
333typedef struct sigevent {
334 sigval_t sigev_value;
335 int sigev_signo;
336 int sigev_notify;
337 union {
338 int _pad[SIGEV_PAD_SIZE];
339 int _tid;
340
341 struct {
342 void (*_function)(sigval_t);
343 void *_attribute; /* really pthread_attr_t */
344 } _sigev_thread;
345 } _sigev_un;
346} sigevent_t;
347
348#define sigev_notify_function _sigev_un._sigev_thread._function
349#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
350#define sigev_notify_thread_id _sigev_un._tid
351
352
353#endif /* _ASM_GENERIC_SIGINFO_H */
354